Description
HD-U6A Led Controller Card, HD-U6A USB-disk LED Display Control Card , Support 32×320 Pixels P10 Text LED Display Screen. Delivery available for island wide!
HD-U6A Led Controller Card
Product Description
Features Types of control card :Single Color/ Dual Color
- Control range :Single color: 320W * 32H
- Dual color: 160W * 32H
- Scan modes: Static, 1/2、 1/3、,1/4、 1/5 、1/6、1/8、1/16 common modes etc
- Communication type :U-Disk
- Power supply :+4.2－5.5V
- Power consumption : ≤0.5W
- Work environment: -20℃–75℃
- Installation dimension: 57（W）*35 （H）（mm）
- Application Range :Used indoor outdoor, semi-outdoor, Led Pharmacy Cross signs Showing text, animation, time, clock etc
- Languages Support: All languages
- Application Software :Software HD2016
Add to Wishlist
Add to Wishlist
Out of stock
Customer Reviews
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Vendor: Ashen Premathilake
- 5.00 rating from 17 reviews
-
රු350.00
-
HC-12 SI4463 Wireless Serial Port Module 1000m Replace Bluetooth (433Mhz)
රු800.00Power supply voltage : 3.2 V — 5.5 V.(if the modules working long hours in emission state, suggested that when the power supply voltage is greater than 4.5 V , you need concatenating a 1N4007 diode to avoid module built-in LDO got fever) Default communication distance : about 600 m (communication distance is adjustable up […]HC-12 SI4463 Wireless Serial Port Module 1000m Replace Bluetooth (433Mhz)
Power supply voltage : 3.2 V — 5.5 V.(if the modules working long hours in emission state, suggested that when the power supply voltage is greater than 4.5 V , you need concatenating a 1N4007 diode to avoid module built-in LDO got fever) Default communication distance : about 600 m (communication distance is adjustable up […]රු800.00Was රු950.00Save රු150 -
4 Channel Relay Module 5v
රු390.00Maximum load: AC 250V/10A, DC 30V/10A Trigger current: 5mA Working voltage: 5V Module size: 50 x 26 x 18.5mm (L x W x H) Four mounting bolts holes, diameter 3.1mm DC+: positive power supply (VCC) DC-: negative power supply (GND) IN: high level control relay NO: normally open relay interface COM: Common Interface Relays NC: normally closed […]4 Channel Relay Module 5v
Maximum load: AC 250V/10A, DC 30V/10A Trigger current: 5mA Working voltage: 5V Module size: 50 x 26 x 18.5mm (L x W x H) Four mounting bolts holes, diameter 3.1mm DC+: positive power supply (VCC) DC-: negative power supply (GND) IN: high level control relay NO: normally open relay interface COM: Common Interface Relays NC: normally closed […]රු390.00Was රු400.00Save රු10 -
Ethernet W5100 Shield
රු1,100.00The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.Ethernet W5100 Shield
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.රු1 100.00Was රු1 500.00Save රු400 -
USB to TTL converter UART module CH340G CH340 3.3V 5V
රු180.00Adopt imported controller RS232 TTL,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power The entire board is coated by high quality transparent […]USB to TTL converter UART module CH340G CH340 3.3V 5V
Adopt imported controller RS232 TTL,which can stabilize the flash with high speed 500mA self recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power The entire board is coated by high quality transparent […]රු180.00Was රු200.00Save රු20 -
Expansion Board Welding Components Prototype PCB Board Suite Electronic DIY Kit Circuit DIY Shield for Arduino
රු490.00Product Introduction: 1.Type:expansion board soldering suite 2.Indicator Lamp:ON (red lamp);L (yellow lamp) 3.Compatible With Arduino Mainboard Interface 4.Packing List: 1)PCB Board:1pc 2)20P Pin:2pcs 3)6P Lengthen Pin Female:2pcs 4)8P Lengthen Pin Female:2pccs 5)LED Indicator Lamp:2pcs 6)470R Rectifier Resistor:2pcs 7)Tact Key:1pcExpansion Board Welding Components Prototype PCB Board Suite Electronic DIY Kit Circuit DIY Shield for Arduino
Product Introduction: 1.Type:expansion board soldering suite 2.Indicator Lamp:ON (red lamp);L (yellow lamp) 3.Compatible With Arduino Mainboard Interface 4.Packing List: 1)PCB Board:1pc 2)20P Pin:2pcs 3)6P Lengthen Pin Female:2pcs 4)8P Lengthen Pin Female:2pccs 5)LED Indicator Lamp:2pcs 6)470R Rectifier Resistor:2pcs 7)Tact Key:1pcරු490.00Was රු500.00Save රු10
Related products
-
Led controller
රු1,100.00Free 2 or 3 days delivery around Sri Lanka.Free learning cd.Limited warranty for product.Led controller
Free 2 or 3 days delivery around Sri Lanka.Free learning cd.Limited warranty for product.රු1 100.00
Reviews
There are no reviews yet.