Customer Reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
1Set 600pcs 30 Kind 1/4W Resistance 1% Metal Film Resistor pack
රු3,000.00රු500.00Product Description: Experimental resistance package 1/4W metal film resistor package 1% precision 1% error 30 kinds of resistance Each of 20Pcs Specifications are as follows :1Set 600pcs 30 Kind 1/4W Resistance 1% Metal Film Resistor pack
Product Description: Experimental resistance package 1/4W metal film resistor package 1% precision 1% error 30 kinds of resistance Each of 20Pcs Specifications are as follows :රු500.00Was රු3 000.00Save රු2500 -
රු2 000.00Was රු3 400.00Save රු1400
-
ESP8266 Serial Wireless Wifi Developent Board Module with Adapter
රු850.00රු800.00This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USb bus […]ESP8266 Serial Wireless Wifi Developent Board Module with Adapter
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USb bus […]රු800.00Was රු850.00Save රු50 -
CNC Shield Board+4Pcs A4988 Stepper Motor Driver For Arduino
රු1,550.00රු1,450.00Arduino cnc kit Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Operating voltage: 5V Digital I/O […]CNC Shield Board+4Pcs A4988 Stepper Motor Driver For Arduino
Arduino cnc kit Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Operating voltage: 5V Digital I/O […]රු1 450.00Was රු1 550.00Save රු100 -
2.4″ Nextion HMI Intelligent Smart USART UART Serial Touch TFT LCD Module
රු4,200.00රු3,800.00Features:- Resolution 320x240
- RGB 65K true to life colors
- TFT screen with built-in 4-wire resistive touch panel
- Easy 4-pin interface for any serial host TTL
- 4M flash memory for custom code and data application
- On-board micro-SD card for upgrade Firmware
- Visual Area: 36.72mm (L) × 48.96mm (W)
- Dimmable: 0 ~ 180 nits, 1%
- dimming interval 5V90mA Power Support
2.4″ Nextion HMI Intelligent Smart USART UART Serial Touch TFT LCD Module
Features:- Resolution 320x240
- RGB 65K true to life colors
- TFT screen with built-in 4-wire resistive touch panel
- Easy 4-pin interface for any serial host TTL
- 4M flash memory for custom code and data application
- On-board micro-SD card for upgrade Firmware
- Visual Area: 36.72mm (L) × 48.96mm (W)
- Dimmable: 0 ~ 180 nits, 1%
- dimming interval 5V90mA Power Support
රු3 800.00Was රු4 200.00Save රු400
Reviews
There are no reviews yet.